Wire Cut & Exposed Bricks

Exposed bricks, solid or with holes, fired at 1100°C, plus matching cladding tiles for traditional, tropical and modern architecture.

Wire cut exposed terracotta bricks

We manufacture exposed bricks in the standard 9 × 4 × 3 in size, both solid and with holes, fired at 1100°C. The finished brick face is the final wall surface, so walls built with these bricks need no plaster or paint.

For existing walls, we also manufacture 9 × 3 in cladding tiles, 12 mm thick, which give the same exposed-brick finish.

  • Fired at 1100°C for consistent strength and colour
  • Available solid or with holes, 9 × 4 × 3 in
  • No plaster or paint needed on the finished wall
  • Matching 9 × 3 in cladding tiles, 12 mm thick
  • Brand JR, terracotta red finish
Wire cut exposed brick wall detail
Exposed Brick — Specification
AttributeDetail
BrandJR
MaterialTerracotta clay
ColourRed
Size9 × 4 × 3 in
FormatsSolid, with holes
Firing Temperature1100°C
FinishExposed face; no plaster or paint needed
UsageExposed walls, decorative facades
Eco-FriendlyYes
Fire ResistantYes
Country of OriginMade in India
Cladding Tile — Specification
AttributeDetail
MaterialTerracotta clay
Size9 × 3 in
Thickness12 mm
UsageWall cladding with an exposed-brick finish

Also Available

We also supply 8 × 8 in terracotta jali in different designs; see Clay & Terracotta Building Products. Hollow clay bricks and hollow blocks in red, brown and maroon finishes are available for partition walls and general masonry.